The Hagner LS1-60 Luminace Standard produces a uniformly bright surface with a diameter of 60mm. The luminace of the surface can be continously varied from 0 to approx 1,500 cd/m². The luminance of the source is measured and indicated on a built-in digital display.
The LS1-60 luminance standard produces a uniformly bright surface with a diameter of 60 mm. The luminance of the surface can be continously varied from 0 to about 1500 cd/m². Irrespective of the luminance value, the coulour temprature remains constant at about 2850 K (Standard Illuminant A). The luminance of the source is continously measured and indicated on a built-in digital display.
The LS1-60 luminance standard is mains-powered, and should preferably be connected via a voltage stabiliser. The light source is an incandescent lamp with an elliptical reflector. It has a life of about 2000 hours, and can easily be replaced. The condition of the lamp itself is not important, as the luminance is measured and displayed by the instrument. A recorder output has been provided for remote indication and recording.
Two versions of the LS1-60 are available:
1. The LS1-60-C, which is fitted with a clear glass window in the viewing aperture. This version of the standard is intended for such applications as calibration of Hagner, Spectra and other tele-luminance meters. On this model the displayed value agrees closely throughout the range with the actual luminance of the viewing aperture. External light incident on the viewing opening does not affect accuracy.
2. The LS1-60-D, which is fitted with an opal glass window. With this the luminance standard can be used for calibration of luminance meters with wider acceptance angles then the telescopic versions, e.g. for fibre optic detectors. The LS1-60-D also differs from the LS1-60-C in that the luminance across the viewing aperture can vary somewhat (maxium 3%), and because the displayed value of luminance does not agree exactly with the true luminance at all levels, although this effect applies mainly at luminance levels below 50 cd/m². However, correction tables supplied with the LS1-60-D make the instrument as easy to use as the LS1-60-C. Care should be taken to prevent ambient light from reaching the viewing aperture when measuring very low luminance levels.
The LS1-60 luminance standard is intended for use in such applications as calibration of luminance meters having an objective siza not exceeding 55 mm.
By fitting apertures with known diameters to the viewing aperture, the LS1-60 can be used to produce highly accurate, very low light levels. Normally, this would require comprehensive laboratory facilities.
Detector:@ Silicon photodiode Vλ– filtered;
Measurement range:@ 0 - 1500 cd/m²;
Accuracy:@ +/- 3%;
Light source:@ PHR50 Spotline;
Power supply:@ 230 V AC;